Buy Dideo Subscription
High-Quality iPhone X Display Assembly: http://bit.ly/2BfLKtB iPhone X Repair Parts: http://bit.ly/2zC3dfP iPhone X DIY Repair Tools: http://bit.ly/2lzLIop Watch the Official iPhone X Screen Repair Guide. Following the step-by-step iPhone X screen assembly replacement instructions we have provided will help you safely fix a cracked or damaged 5.8-inch (diagonal) all-screen OLED Multi-Touch display. Visit Fixez.com for all of the DIY iPhone X replacement screens, parts and tools you need to fix your phone quickly, and affordably. If you need your iPhone X repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your device for you. They are available Monday - Friday, 9am to 5pm PST. Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng Like us on Facebook: https://www.facebook.com/fixez.com Follow us on Twitter: https://twitter.com/fixezdotcom iPhone X Screen Repair Video Steps: Step 1 • Power down your Apple iPhone X smartphone. Step 2 • Eject the Nano-SIM Card Tray. Step 3 (iPhone X Display Assembly) • Remove the bottom 3.4mm Pentalobe screws located next to the lightning connector. • Apply some heat and then use the precision knife to create enough space to insert a triangle opening tool. • With the opening tool slice through the adhesive and carefully decouple the iPhone X display assembly from the rear case. Now the standard, it opens to the side. • The display assembly is still connected to the iPhone by cables, so don’t try to remove it entirely just yet. • Remove the following 5 Tri-Point screws securing the bracket that covers every logic board connector. These screws are different sizes, so be sure to remember where they go. • With the unibracket out of the way pry the battery and display cables up from the logic board and free the 5.8” all-screen OLED Super Retina HD Display from the phone. Step 4 (iPhone X Upper Display Component Assembly) • Remove the following 3 Tri-Point screws. • Use the spudger to help extricate the upper display component assembly. It includes the loudspeaker, microphone, ambient light sensor, flood illuminator, and proximity sensor. * To reassemble your device, follow the steps in reverse order.
