iPhone 6 Plus FPC Digitizer Connector Repair



0
105517

This is an iPhone 6 Plus FPC digitizer connector repair. For daily repair posts follow on Facebook: https://www.facebook.com/MobileLabUK To find out more services and repairs we offer please contact us on Facebook =) Mobile Lab Gadgets Repair and Micro Soldering Specialists Nottingham, United Kingdom Steps To Perform Repair 1. Apply flux and low melt solder to broken connector. 2. Use a heat gun at approx 230 degrees full air flow to remove connector. 3. Clean pads so they are smooth and flat using flux, low melt solder and solder wick. 4. Position new connector and apply flux. 5. Apply solder to each pad staring in the four corners. 6. Ensure that there is a good connection on each pad checking with a needle. 7. Clean area with isopropyl alcohol and make sure all flux is cleared and the area is dry. 8. Test with screen to make sure everything is working fine.

Published by: Repair Outlet Published at: 8 years ago Category: مردم و وبلاگ